Add to Cart
The Grades and Applications
Grade | Machining Mode | Materials | Applications |
MCD5320 | Continuous Interrupted | Good wear resistance is a better overall performance of coarse-grained material,suitable for machining aluminum, high silicon aluminum. cast aluminum, aluminum and composite materials. | automotive, aerospace,medical,mobile phone |
MCD5830 | Continuous Interrupted | Bimodal crystals are used in extremely harsh working conditions,MMC,Si content is more than 14% of aluminum,glass fiber, high density fiberboard,laminate flooring. | automotive,aerospace,woodworking (roughing) |
MCD5210 | Continuous Interrupted | High surface finish requirements of aluminum,copper,precious metals,wood,plastics. | circuit board,powder metallurgy,medical instruments |
The specificaion in Detail
Specification | Dimension | Edge | Preferred Grade | |||
ISO | Φi.c | S | MCD5210 | MCD5320 | MCD5830 | |
DCGW 070201 | 6.35 | 2.38 | 1 | ● | ||
DCGW 070202 | ||||||
DCGW 070204 | ||||||
DCGW 070208 |
Please fill in the apply form for free trial
CHENGDU MANUFACTURED D&C TECHNOLOGY CO., LTD | ||||||
Adress:NO.210, Long'an Road, Longquan Area, Chengdu, China | ||||||
Tel:+86-28-68903991 Fax:+86-28-68903992 Email:yan.c@mdc-tech.com | ||||||
Application Form of Free Samples | ||||||
Company | Address | |||||
Contact | Email: | |||||
Tel | Fax | |||||
Cutting Paramerters Related | ||||||
Processing form | A.Turning | B. Boring | C. Milling | |||
Machine equipment | Brand and series no. | Quantity (pcs) | Max. Speed of spindle(rpm) | |||
Workpiece | Name (like Roller,Pump,Gear etc.) | Material (like cast iron, HSS, hardened steel etc.) | Hardness(HRC or HB) | |||
Cutting Modes | A.Rough | B.Semi-finish | C.Finish | |||
A.Continuous cutting | B.Light interrupted cutting | C.Middle interrupted cutting | D.Heavy interrupted cutting | |||
RA | Cutting speed(m/min) | F(mm/r) | Cutting depth ap(mm) | Dry or wet cutting | ||
Information of cutting tools used before or using now | ||||||
Brand | Mode Code | AP | Vc or N | Lifetime(pcs/tip) | Dry or wet cutting | |
Tool failure or change reason | Quantity of tool using per month | |||||
Tool failure or change reason: A. Rake face wear B. Flank wear C. Chipping D. thermal fatigue E. Breakage F. Roughness | ||||||
If the tool is milling cutter, please fill the blank follow also. If not, ignore it. | ||||||
Main angle | Tooth | Width of cutting | Cutting quantity per tooth | |||
Mark in the blanks of following factors you valued most of the tool, or write below others. | ||||||
Efficiency | Cost | Precision | Tool working time | Others | ||
Notes | (here you can write something you want us to pay special attention) |